To all exam users who aim to clear exam and hope to choose the suitable preparation materials for H3C GB0-381-ENU exam, maybe it is hard to make a decision while facing so many different materials on the internet. There are so many various & similar questions filled with the market and you may get confused about which is the most helpful one for you. Our GB0-381-ENU certification dumps not only have various advantages to help you clear exam successfully but can interest you to receive and study core knowledge. So we introduce you some advantage of different aspects of our GB0-381-ENU study guide files for your reference.

Cost-efficient exam materials with high pass rate

The passing rate of our GB0-381-ENU PDF dumps questions is increasing to 98%-100%, so you may know that our exam materials are so useful, will they be expensive? No. Actually, our GB0-381-ENU certification dumps are cost-efficient and affordable for most examinees. Comparing to the exam fees, it is really cheap. In consideration of high exam cost and good certification benefits, it is really a good deal to spend little money on valid H3C GB0-381-ENU study guide files which can help you clear exam for sure. So why are you still hesitating? Only you attach close attention on the contest of GB0-381-ENU practice test questions which is high accuracy and high efficiency, you will find it is valid to prepare efficiently and clear exam successfully.

After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Diverse versions for choosing

In consideration of the various requirements of our customers we develop three different versions of H3C GB0-381-ENU practice test questions (PDF version, PC test engine and APP test engine) for you reference. Different formats have different features & advantages, but you can choose any version or the package version of GB0-381-ENU certification dumps as three versions have same questions and answers. The PC test engine & APP test engine of GB0-381-ENU study guide files has the impeccable simulation function for your exam. The APP version of GB0-381-ENU practice test questions can be installed & downloaded on your phone. You just need download the content of H3C GB0-381-ENU certification dumps you wanted, and then you can study it whenever, even you are on offline state.

Concentrated on quality of products

Our education elites have been dedicated to compile the high efficiency GB0-381-ENU study guide files for many years and they focus their attention on editing all core materials and information into our products. Please rest assured to regard us as the helpful helper which offers the most efficient GB0-381-ENU certification dumps for you. We are constantly improving ourselves be stronger and stronger so the quality of our GB0-381-ENU practice test questions are always imitated but never be surpassed. Our H3C GB0-381-ENU study guide files speak louder than words as the leading position in this field. Besides, we provide satisfying after-sales service which is available for you convenience 24/7 the whole year. We believe that you can pass exam certainly with our GB0-381-ENU practice test questions.

H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:

1. The RIP protocol is enabled on a router, the process number is 1, and the priority is 10; at the same time, the OSPF protocol is enabled, the process number is 100, and the priority is 100. If two processes learn the route of network segment 10.0.0.0/8 at the same time, the metric values ​​are 1 (hop count) and 100 (cost value) respectively, and the next hops are 1.0.0.1 and 1.0.0.2 respectively.
After the router receives the packet with the destination address 10.0.0.1, what should it do?

A) Unable to judge
B) forward to 1.0.0.1
C) forward to 1.0.0.2
D) Forward to both 1.0.0.1 and 1.0.0.2

2. In the topology shown in the figure, the following configurations are performed on RTA and RTB respectively:
RTA-ospf-1-area-0.0.0.1]network 192.168.0.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.1.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.2.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.3.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.4.0 0.0.0.255
RTB] acl number 2000
RTB-acl-basic-2000] rule 0 permit source 192.168.1.0 0.0.0.255
RTB-ospf-1] filter-polic2000 import
Then the possible routes in the RTC routing table are _____

A) 192.168.0.0/24
B) 192.168.4.0/24
C) 192.168.1.0/24
D) 192.168.2.0/24

3. The disadvantage of Z routers using the Ethernet MAC address to generate the NET address of the IS-IS process is ________.

A) MAC addresses are not necessarily related to network planning, and MAC addresses are not easy to remember
B) MAC addresses are not global, and management is inconvenient
C) The MAC address and the Stem-ID in the NET have the same length, which is easy to confuse

4. The output of displaospfv3 on a router is as follows
Routing Process OSPFv3 (1) with ID 1.1.1.1
Graceful restart helper enabled
Graceful restart helper srtict-lsa-checking disabled
SPF schedule dela5 secs, Hold time between SPFs 10 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Number of external LSAs 0. These external LSAs checksum Sum 0x0000
Number of AS-Scoped Unknown LSA 0
Number of LSA originated 19
Number of LSA received 0
Number of areas in this router is 3
Area BACKBONE(0)
Number of interfaces in this area is 2
SPF algorithm executed 9 times
Number of LSA 3. These LSAs checksum Sum 0x6C29
Number of Unknown LSA 0
Area 0.0.0.1
Number of interfaces in this area is 1
SPF algorithm executed 12 times
Number of LSA 3. These LSAs checksum Sum 0x22F1E
Number of Unknown LSA 0
Area 0.0.0.10
Number of interfaces in this area is 1
SPF algorithm executed 1 times
Number of LSA 3. These LSAs checksum Sum 0x81E2
Number of Unknown LSA 0
Then the router has ________ interfaces in the OSPFv3 process.

A) 1
B) 3
C) 2
D) 4

5. The networking is as shown in the figure, RTA and RTB are route reflectors, RTC and RTD are route reflector clients, and RTC and RTD need to learn BGP routes from each other. How should I plan to reduce repeated routing information transmission and achieve the highest reliability?

A) RTA and RTB are configured with the same cluster-id, RTC and RTA establish iBGP neighbor relationship, RTD and RTB establish iBGP neighbor relationship
B) RTA and RTB are configured with different cluster-ids, RTC establishes iBGP neighbor relationship with RTA and RTB, RTD establishes iBGP neighbor relationship with RTA and RTB
C) RTA and RTB are configured with different cluster-ids, RTC and RTA establish iBGP neighbor relationship, RTD and RTB establish iBGP neighbor relationship
D) RTA and RTB configure the same cluster-id, RTC establishes iBGP neighbor relationship with RTA and RTB, RTD establishes iBGP neighbor relationship with RTA and RTB

Solutions: