Tested Material Used To FCP_FAZ_AD-7.4 Test Engine Exam Questions in here [Jan-2026]
Penetration testers simulate FCP_FAZ_AD-7.4 exam PDF
NEW QUESTION # 68
What are offline logs on FortiAnalyzer?
- A. Compressed logs, also known as archive logs
- B. Logs that are indexed and stored in the SQL database
- C. Real-time logs that are not yet indexed
- D. Any logs collected from offline devices after they boot up
Answer: A
Explanation:
Archive logs: When a real-time log file in Archive has been completely inserted, that file is compressed and considered to be offline." https://docs.fortinet.com/document/fortianalyzer/7.4.3/administration-guide/381919/logs
NEW QUESTION # 69
Refer to the exhibit.
Based on the partial outputs displayed, which devices can be members of a FortiAnalyzer Fabric?
- A. FortiAnalyzer2 and FortiAnalyzer3
- B. FortiAnalyzer1 and FortiAnalyzer2
- C. FortiAnalyzerl and FortiAnalyzer3
- D. All devices listed can be members
Answer: D
NEW QUESTION # 70
What can you do on FortiAnalyzer to restrict administrative access from specific locations?
- A. Configure an ADOM for respective location.
- B. Configure trusted hosts for that administrator.
- C. Configure two-factor authentication with a remote RADIUS server.
- D. Enable geo-location services on accessible interface.
Answer: B
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.2.0/hardening-your-fortigate/582009/system- administrator-best-practices
NEW QUESTION # 71
Which daemon is responsible for enforcing raw log file size?
- A. logfiled
- B. miglogd
- C. sqlplugind
- D. oftpd
Answer: A
NEW QUESTION # 72
If the primary FortiAnalyzer in an HA cluster fails, how is the new primary elected?
- A. The firmware version is checked first.
- B. The active port number is checked first.
- C. The configured IP address is checked first.
- D. The configured priority is checked first
Answer: D
Explanation:
In the case of a primary device failure, FortiAnalyzer HA uses the following rules to select a new primary:
* All cluster devices are assigned a priority from 80 to 120. The default priority is 100. If the primary device becomes unavailable, the device with the highest priority is selected as the new primary device. For example, a device with a priority of 110 is selected over a device with a priority of 100.
* If multiple devices have the same priority, the device whose primary IP address has the greatest value is selected as the new primary device. For example, 123.45.67.124 is selected over 123.45.67.123.
* If a new device with a higher priority or a greater value IP address joins the cluster, the new device does not replace (or pre-empt) the current primary device automatically.
FortiAnalyzer_7.0_Study_Guide-Online page 62
NEW QUESTION # 73
When working with FortiAnalyzer reports, what is the purpose of a dataset?
- A. To provide the layout used for reports
- B. To set the data included in templates
- C. To define the chart type to be used
- D. To retrieve data from the database
Answer: D
Explanation:
Reference:
Datasets: Structured Query Language (SQL) SELECT queries that extract specific data from the database
NEW QUESTION # 74
Which two parameters impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)
- A. License type
- B. RAID level
- C. Disk size
- D. Total quota
Answer: B,C
Explanation:
Disk size - This is a fundamental parameter. The total disk size directly impacts how much space is available for storing logs, reports, and other data. A larger disk size means more space is available, which can influence the reserved space portion proportionally.
RAID level - The RAID (Redundant Array of Independent Disks) configuration used affects how disk space is utilized. Different RAID levels offer varying balances of performance, data availability, and storage capacity. For example, RAID 1 mirrors the entire contents of the disk, effectively halving the storage capacity for data protection, while RAID 5 uses striping with parity and offers better space efficiency but requires space for parity information.
NEW QUESTION # 75
Which two statements regarding FortiAnalyzer log forwarding modes are true? (Choose two.)
- A. In aggregation mode, you can forward logs to syslog and CEF servers.
- B. Both modes, forwarding and aggregation, support encryption of logs between devices.
- C. Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device at a scheduled time.
- D. Forwarding mode forwards logs in real time only to other FortiAnalyzer devices.
Answer: B,C
Explanation:
Both modes, forwarding and aggregation, support encryption of logs between devices.
Both forwarding and aggregation modes can use encryption to securely transfer logs between FortiAnalyzer devices.
Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device at a scheduled time.
In aggregation mode, logs are stored and then transferred to another FortiAnalyzer at a scheduled time, rather than in real-time. This mode is typically used when consolidating logs from multiple devices into a central FortiAnalyzer.
The other options are incorrect because:
Forwarding mode sends logs in real-time but not exclusively to other FortiAnalyzer devices; it can also send logs to external systems like syslog servers.
Aggregation mode is primarily for consolidating logs to another FortiAnalyzer and doesn't focus on forwarding logs to syslog or CEF servers.
NEW QUESTION # 76
Refer to the exhibits.
How many events will be added to the incident created after running this playbook?
- A. No events will be added.
- B. Thirteen events will be added.
- C. Five events will be added.
- D. Ten events will be added.
Answer: B
NEW QUESTION # 77
When you perform a system backup, what does the backup configuration contain? (Choose two.)
- A. Device list
- B. System information
- C. Authorized devices logs
- D. Generated reports
Answer: A,B
Explanation:
https://help.fortinet.com/fa/cli-olh/5-6-5/Content/Document/1400_execute/backup.htm Reference: https://help.fortinet.com/fauth/5-2/Content/Admin%20Guides/5_2%20Admin%20Guide/300
/301_Dashboard.htm
NEW QUESTION # 78
What are offline logs on FortiAnalyzer?
- A. Compressed logs, also known as archive logs
- B. Logs that are indexed and stored in the SQL database
- C. Real-time logs that are not yet indexed
- D. Any logs collected from offline devices after they boot up
Answer: A
Explanation:
Archive logs: When a real-time log file in Archive has been completely inserted, that file is compressed and considered to be offline." https://docs.fortinet.com/document/fortianalyzer/7.4.3/administration-guide/381919
/logs
NEW QUESTION # 79
What does the disk status Degraded mean for RAID management?
- A. The hard drive is no longer being used by the RAID controller.
- B. One or more drives are missing from the FortiAnalyzer unit.
- C. FortiAnalyzer determined that the parity data in the disk is not valid.
- D. The device is writing data to the disk to restore the volume to an optimal state.
Answer: B
Explanation:
When the RAID status is Degraded, it typically indicates that one or more drives in the RAID array have failed or are missing, causing the RAID array to operate with reduced redundancy. In this state, the array is still functioning, but it's at risk because the fault tolerance provided by RAID is compromised.
NEW QUESTION # 80
Which two statement are true regardless initial Logs sync and Log Data Sync for Ha on FortiAnalyzer?
- A. When Logs Data Sync is turned on, the backup device will reboot and then rebuilt the log database with the synchronized logs.
- B. By default, Log Data Sync is disabled on all backup devise.
- C. With initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
- D. Log Data Sync provides real-time log synchronization to all backup devices.
Answer: A,C
NEW QUESTION # 81
Refer to the exhibit.
Which image corresponds to the packet capture shown in the exhibit?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: A
Explanation:
FortiAnalyzer Administrator 7.2 Study Guide p. 183 OFTP is used over SSL when information is synchronized between FortiAnalyzer and FortiGate. OFTP listens on port TCP/514. Port UDP/514 is used for unencrypted log communication.
NEW QUESTION # 82
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
- A. To properly correlate logs
- B. To improve DNS response times
- C. To use real-time forwarding
- D. To resolve host names
Answer: A
NEW QUESTION # 83
Which daemon is responsible for enforcing the log file size?
- A. ofrpd
- B. logfiled
- C. miglogd
- D. sqlplugind
Answer: B
Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 121: The logfiled process enforces the log file size and is also responsible for disk quota enforcement by monitoring the other processes.
NEW QUESTION # 84
The admin administrator is failing to register a FortiClient EMS on the FortiAnalyzer device.
What can be the reason for this failure?
- A. ADOM mode should be set to advanced, in order to register the FortiClient EMS device.
- B. ADOMs are not enabled on FortiAnalyzer.
- C. A separate license is required on FortiAnalyzer in order to register the FortiClient EMS device.
- D. FortiAnalyzer is in an HA cluster.
Answer: B
NEW QUESTION # 85
What FortiGate process caches logs when FortiAnalyzer is not reachable?
- A. logfiled
- B. miglogd
- C. sqlplugind
- D. oftpd
Answer: B
Explanation:
The miglogd process on FortiGate is responsible for handling log forwarding and caching. When FortiAnalyzer is unreachable, miglogd temporarily stores logs in a local cache until the connection is restored.
This prevents log loss during temporary network interruptions or FortiAnalyzer outages.
Reference: https://forum.fortinet.com/tm.aspx?m=143106
NEW QUESTION # 86
Which log will generate an event with the status Contained?
- A. An AV log with action=quarantine.
- B. An IPS log with action=pass.
- C. A WebFilter log with action=dropped.
- D. An AppControl log with action=blocked.
Answer: A
NEW QUESTION # 87
......
Authentic Best resources for FCP_FAZ_AD-7.4 Online Practice Exam: https://braindump2go.examdumpsvce.com/FCP_FAZ_AD-7.4-valid-exam-dumps.html
