100% Real & Accurate HPE0-S59 Questions and Answers with Free and Fast Updates
Get Unlimited Access to HPE0-S59 Certification Exam Cert Guide
NEW QUESTION # 47
Your customer plans to deploy VMware vSAN using D3940 Storage Modules.
Which statement about this solution is true?
- A. For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.
- B. To use the storage controller that will access D3940 storage modules, a second CPU must be installed.
- C. All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured
- D. The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.
Answer: A
Explanation:
For VMware vSAN deployments, it is recommended that all drives in the D3940 storage modules be SSD drives to ensure optimal performance and efficiency. SSDs provide the necessary speed and reliability required by vSAN for handling storage-intensive operations and maintaining high performance.
NEW QUESTION # 48
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
Explanation:
To check the Core Analysis Engine (CAE) Log on the HPE Superdome Flex 280, navigate to theLogssection in the management interface. This section provides access to various logs, including system, security, and diagnostic logs, which encompass the CAE logs necessary for detailed analysis and troubleshooting.
NEW QUESTION # 49
What is one of me benefits of using HPE Composer 2?
- A. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
- B. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- C. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- D. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
Answer: D
Explanation:
One of the key benefits of using HPE Composer 2 is its enhanced scalability. A pair of HPE Composer 2 modules can manage up to 42 frames, which is double the capacity managed by the previous generation HPE Composer (which manages up to 21 frames). This increased capacity allows for more efficient and large-scale management of HPE Synergy environments.
NEW QUESTION # 50
Which statement about manual orchestration during the firmware update is true?
- A. It provides an ability to select and update one side of the Interconnect topology at a time
- B. It allows all the interconnect modules to be activated manually at the same time.
- C. It provides the ability to install an older firmware version than currently Installed In the interconnect
- D. It is supported only for logical enclosures with at least three frames
Answer: A
NEW QUESTION # 51
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Remove the offline disks using array management tools
- B. Install and configure MPIO on me Windows system
- C. Remove the offline disks using Windows Disk Management
- D. Disable deduplication for this volume at the array level
Answer: B
NEW QUESTION # 52
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. To use all compute nodes, the customer must create at least two logical enclosures
- B. The customer can add one D3940 storage Module to each of the frames
- C. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- D. To manage all frames, the customer must buy two additional HPE Composer 2 modules
Answer: A
Explanation:
In an HPE Synergy environment, a logical enclosure represents a management domain that groups multiple Synergy frames and their associated compute, storage, and fabric resources. Given the setup with 3 HPE Synergy 12000 Frames and the specified components, the customer must create at least two logical enclosures to effectively manage all compute nodes and resources across multiple frames. This ensures proper resource allocation, management, and redundancy.
NEW QUESTION # 53
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 54
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At HPE OneView Interface to verify whether the server is In the maintenance mode
- B. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
- C. At the iLO interface to verify whether the ILO Advanced license is properly applied
- D. At HPE OneView Interface to verify whether the iLO processor is disabled
Answer: C
NEW QUESTION # 55
Which statement about HPE OneView milestone releases is true?
- A. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
- B. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
- C. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
- D. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.
Answer: A
NEW QUESTION # 56
Which statement about the HPE D3940 storage module is true?
- A. Up to five modules can be installed in a single frame with Gen10 servers
- B. it is configured through CLl available from HPE Synergy console
- C. SATA drives requires redundant 10 adapters to be installed in this module
- D. Only one type of drives (SATA, SAS, SSD) can be installed in each module
Answer: B
NEW QUESTION # 57
Which statement about an HPE Oneview support dump is true?
- A. Support dump is a binary file that can be opened only in a dedicated application
- B. Preview support dump is available only when creating an appliance support dump
- C. Appliance support dump by default contains a logical enclosure support dump
- D. Support dump can be created if HPE Virtual Connect modules are installed in the frame
Answer: A
NEW QUESTION # 58
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For an uplink set, ports from different modules can be selected
- B. An additional license is required to change the enclosure count
- C. Both modules are located in different frames for redundancy
- D. interconnect modules are installed in interconnect bays 1 and 4
Answer: D
Explanation:
In the HPE Synergy setup shown in the exhibit, the interconnect type is Virtual Connect SE 32Gb FC Module for Synergy with an enclosure count of 1 and interconnect bay set 1. Typically, in such configurations, the interconnect modules are installed in bays 1 and 4 for redundancy. This placement ensures high availability and failover capabilities.
NEW QUESTION # 59
The proposal consists of.
- 3 HPE Synergy 12000 frames
- 6 HPE Composer 2 modules
- 2 HPE Virtual Connect SE 100 GO F32 Module
- 4 HPE Synergy 50 GO interconnect Link Module
Which statements about this proposed design are true? (Select two.)
- A. The selected interconnect modules do not provide the requested WWN virtualization
- B. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules
- C. Remove 4 HPE Composer 2 modules from the design, as they are not required
- D. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added
- E. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100 GO F32 modules
Answer: C,D
Explanation:
* D. FC upgrade licenses for HPE Virtual Connect SE 100 GbF32 Module must be added:To enable Fibre Channel functionality on the HPE Virtual Connect SE 100Gb F32 Modules, it is necessary to add FC upgrade licenses. These licenses unlock the FC capabilities required for the proposed setup.
* E. Remove 4 HPE Composer 2 modules from the design, as they are not required:The proposed design includes 6 HPE Composer 2 modules, but typically, only a pair of HPE Composer 2 modules is required to manage up to 21 frames. Therefore, the remaining 4 Composer 2 modules are not necessary and can be removed from the design.
NEW QUESTION # 60
Your customer plans to expand an existing nPar based on a single HPE Superdome Flex chassis. Which statement about workload availability during expansion is true?
- A. Online expansion is available only if RMC is used for management.
- B. Powered nPar can be expanded if it does not use HPE Persistent Memory
- C. Powered nPar can be expanded only if HPE Superdome Flex 280 is used
- D. HPE Superdome Flex does not support expansion of powered on nPars
Answer: B
Explanation:
HPE Superdome Flex allows for the expansion of powered-on nPars (nPartitions), but this capability is subject to certain conditions. One of these conditions is that the nPar does not use HPE Persistent Memory. Expanding an nPar with Persistent Memory typically requires a shutdown to reconfigure the memory settings safely.
NEW QUESTION # 61
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?
- A. HPE Superdome Flex Grid licenses enabling connectivity between chassis
- B. Rack Management Controller for nPar management
- C. One base chassis and three expansion chassis with licenses
- D. At least Tour HPE Persistent Memory DIMMs per nPar
Answer: C
NEW QUESTION # 62
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. This logical JBOD can be presented to the compute nodes in a different frame.
- B. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- C. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
- D. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
Answer: B
NEW QUESTION # 63
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
- B. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- C. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- D. The customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.
Answer: B
NEW QUESTION # 64
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. For an uplink set, ports from different modules can be selected
- B. interconnect modules are installed in interconnect bays 1 and 4
- C. An additional license is required to change the enclosure count
- D. Both modules are located in different frames for redundancy
Answer: C
NEW QUESTION # 65
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?
- A. HPE ProLiant DL560 Gen10
- B. HPE Superdome Flex 280
- C. HPE ProLiant DL380 Gen 10 Plus
- D. HPE Synergy 480 Gen10 Plus
Answer: C
NEW QUESTION # 66
Match HPE SimpliVity term with the definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE SimpliVity term with their respective definitions:
* ArbiterDefinition:Facilitates communication between nodes and resolves state conflicts to ensure service continuity.
* Compute nodeDefinition:Non-hyperconverged servers that can exist in an HPE SimpliVity environment and provide additional compute capacity while consuming the storage provided by the hyperconverged nodes.
* Management Virtual ControllerDefinition:Provides centralized management and events end-point for vCenter.
* Intelligent Workload OptimizerDefinition:Integrates with VMware Distributed Resources Scheduler to ensure optimal placement of the VM compute resources.
* Arbiter:This component is essential for ensuring that the HPE SimpliVity nodes communicate properly and that any state conflicts are resolved, which is critical for maintaining service continuity.
* Compute node:These are non-hyperconverged servers that add additional compute capacity to the HPE SimpliVity environment. They utilize the storage resources provided by the hyperconverged nodes.
* Management Virtual Controller:This controller is responsible for centralized management and acts as the events end-point for vCenter, allowing for streamlined management of the SimpliVity environment.
* Intelligent Workload Optimizer:This tool integrates with VMware's Distributed Resources Scheduler (DRS) to ensure that virtual machine (VM) compute resources are placed optimally across the infrastructure.
NEW QUESTION # 67
......
Reliable Study Materials for HPE0-S59 Exam Success For Sure: https://braindump2go.examdumpsvce.com/HPE0-S59-valid-exam-dumps.html
