[Jan 12, 2023] Dumps Collection NCP-MCI-6.5 Test Engine Dumps Training With 158 Questions [Q73-Q98]

[Jan 12, 2023] Dumps Collection NCP-MCI-6.5 Test Engine Dumps Training With 158 Questions

Nutanix NCP-MCI-6.5 Dumps - 100% Cover Real Exam Questions

NEW QUESTION 73
An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container space for each application.
How should the administrator meet this requirement?

A. Create two containers and reserve space for vDisks
B. Create one container and set capacity reservation
C. Create two containers and reserve space for containers
D. Create one container and enable compression

Answer: A

NEW QUESTION 74
An administrator responsible for a VDl environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDl VMs.
What are two impacts on the cluster? (Choose two)

A. Increase CPU ready%
B. Increasing CPU counts will decrease memory utilization
C. Increase memory utilization%
D. Increase CPU utilization%

Answer: B,C

NEW QUESTION 75
Which capability refers to the storage of VM data on the node where the VM is running and ensure that the read I/O does not have to traverse the network?

A. Data Tiering
B. Data Locality
C. Intelligent Tiering
D. Intelligent Locally

Answer: B

NEW QUESTION 76
A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk. What are these vDisk copies called?

A. Shadow Clones
B. Golden Images
C. Volume Groups
D. Disk Clones

Answer: C

NEW QUESTION 77
Which two predefined views can be added to a report to identify inefficient VMs?

A. Overprovisioned VMs List
B. Underprovisioned VMs List
C. Constrained VMs List
D. Zombie VMs List

Answer: A,C

NEW QUESTION 78
A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.
What is the effect on the replicas of the VMs?

A. Some VMs may reboot and gain access to data
B. No VMs lose data if the node has two or more SSDs
C. No VMs lose data because of RF2
D. Some VM data may be lost

Answer: D

NEW QUESTION 79
An administrator needs to configure Prism to send encrypted messages to a set of recipients.
Which setting must be applied?

A. Install SSL certificates on Prism Central
B. Configure Prism Central to use Cluster Lockdown
C. Use SMTP Port 25
D. Set SMTP Security Mode to STARTTLS

Answer: D

Explanation:
Explanation
The best way for the administrator to configure Prism to send encrypted messages to a set of recipients is to set the SMTP Security Mode to STARTTLS. This will ensure that all messages sent over SMTP are encrypted and secure. Additionally, the administrator should consider installing SSL certificates on Prism Central to ensure that the messages are being sent securely. Finally, the administrator should consider configuring Prism Central to use Cluster Lockdown, which will help ensure that the messages are only sent to the intended recipients.

NEW QUESTION 80
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event Which storage optimizations should the administrator set to meet the requirements?

A. Compressoion and Deduplication
B. Deduplication and Erasure Coding
C. Compression Deduplication and Erasure Coding
D. Compression only

Answer: A

NEW QUESTION 81
The Linux administration team has requested access rights to any current or future Linux VM in the environment What entity should be selected when assigning this new role?

A. AHV Cluster
B. Image
C. Project
D. Category

Answer: C

NEW QUESTION 82
A customer wants to isolate a group of VMs within their Nutanix environment for security reasons. The customer creates a VM with two NICs to act as a firewall and installs the appropriate software and certificates.
However, no one from the outside can access the application.
What is the likely cause of this problem?

A. One of the NICs needs to be configured on the internal VLAN
B. Wireshark is installed on the NAT VM
C. A shared volume group must be used by all isolated VMs
D. More than one NIC cannot be added to a VM

Answer: A

NEW QUESTION 83
What is the name of the internal bridge used by AHV nodes and CVMs?

A. vnet0
B. virbr0
C. br1
D. br0

Answer: B

NEW QUESTION 84
An administrator wants to create a trunked interface on a VM on AOS 5.15x.
Which two steps should the administrator take first to achieve this? (Choose two)

A. Log in over PE web UI.
B. Update VM dialog.
C. SSH to CVM.
D. Use acli

Answer: C,D

NEW QUESTION 85
What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?

A. The host will automatically redirect I/O and VMs will continue running.
B. VM High Availability will restart the impacted VMs on another host
C. The impacted host and VMs will automatically shut down.
D. A Live Migration will be performed on the affected VMs.

Answer: A

NEW QUESTION 86
An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

A. Cluster IO, Network, Database and App Server CPU
B. Cluster IO, CPU, Memory and Database and App Server CPU
C. Cluster IO, CPU, Memory, Network, App Server CPU
D. Cluster CPU and Memory Only

Answer: C

NEW QUESTION 87
An administrator is configuring cross-hypervisor DR from an ESXi cluster to a new AHV cluster. When the administrator migrates a protection domain to the AHV cluster, the VMs fail to boot.
What should the administrator do to correct this problem?

A. Uninstall VMware Tools from the VMs.
B. Add all VMs into a single consistency group.
C. Increase the snapshot frequency to more than 6 hours.
D. Install Nutanix Guest Tools in the protected VMs.

Answer: D

NEW QUESTION 88
An administrator needs to ensure logs, alerts and information is consistent across clusters that are located in different countries.
Which service needs to be configured?

A. SMTP
B. DNS
C. SNMP
D. NTP

Answer: D

NEW QUESTION 89
Which Nutanix service control ncli, the HTML5 UI, and Rest API?

A. Cassandra
B. Chronos
C. Prism
D. Zookeeper

Answer: C

Explanation:
Explanation
Prism is the central service control used by Nutanix to manage the clusters. It provides a unified view of the entire system, and it is used to control the HTML5 UI, the nCLI, and the REST API. Prism is used to manage the resources of the system, such as the nodes, storage, and networks, as well as to monitor the performance of the system and the applications running on it.

NEW QUESTION 90
Which baseline is used to identify a Zombie VM?

A. VM is powered off for the past 21 days.
B. Fewer than 30 1/Os and less than 1000 bytes per day of network traffic for the past 21 days
C. VM has no logins for the past 21 days
D. Memory usage is less than 1% and memory swap rate is equal to 0 Kbps for the past 21 days.
VM has no logins for the past 21 days

Answer: B

NEW QUESTION 91
An administrator is configuring data protection and DR for a multi-tier application. All VMs must be protected at the same time.
What must the administrator do to meet this requirement?

A. Create a protection domain for the application and select auto-protect related entities
B. Create a protection domain for each VM with identical schedules
C. Create a consistency group for each VM with identical schedules
D. Create a consistency group for the application and place all VMs in it

Answer: D

NEW QUESTION 92
An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.
Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?

A. A VM metric chart for each of the relevant metrics
B. A VM entity chart with each of the relevant metrics.
C. A cluster entity chart with each of the relevant metrics
D. A cluster metric chart for each of the relevant metrics

Answer: A

NEW QUESTION 93
An administrator has set up a local web server accessible to the Nutanix clusters.
Which two steps are required to set up LCM for an environment without Internet access? (Choose two.)

A. Edit LCM Advanced Settings m Prism Central and enter the address of the web server.
B. Edit LCM Advanced Settings in Prism Element and enter the address of the web server.
C. Download the lcm_dark_site_version. tar . gz LCM bundle from the support portal.
D. Download the lcai_disconnecced_version. tar.gz LCM bundle from the support portal.

Answer: B,C

NEW QUESTION 94
How will an HDD failure affect VMs with data on the failed device?

A. The VMs will remain operational on that host and continue to function normally with no noticeable impact
B. An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.
C. The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.
D. A live migration will be initiated, moving the affected VMs to a host that contains the replica data.

Answer: A

NEW QUESTION 95
After logging into Prism Element, an administrator presses the letter A on the Keyboard.
What is the expected outcome of this input?

A. Analysis will launch
B. Alerts page will launch
C. About Nutanix page will launch
D. API Explorer page will launch

Answer: B

NEW QUESTION 96
An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.