Get up-to-date Real Exam Questions for 300-510 UPDATED [2023]
Pass Cisco 300-510 Exam in First Attempt Guaranteed
Cisco 300-510 Implementing Cisco Service Provider Advanced Routing Solutions exam is a specialized certification exam designed for IT professionals who are seeking to advance their knowledge and skills in the field of service provider routing solutions. 300-510 exam is part of the Cisco Certified Specialist - Service Provider Advanced Routing Implementation certification track.
Cisco 300-510 certification exam, also known as Implementing Cisco Service Provider Advanced Routing Solutions, is designed for IT professionals who want to validate their expertise in implementing advanced routing technologies and solutions within a service provider network. 300-510 exam tests the candidate's knowledge and skills in configuring, implementing, and troubleshooting advanced routing technologies, including Multiprotocol Label Switching (MPLS), Border Gateway Protocol (BGP), and Segment Routing (SR).
NEW QUESTION # 13
Refer to the exhibit. An administrator is troubleshooting network issues on a customer's network PE1 cannot form an LDP relationship with PE2 using LDP ID 192 168.1.1. Due to this connectivity issue, the customer's routes behind both PE routers cannot be exchanged.
Which action must the administrator take to correct the problem?
- A. Configure PE1 with a static route to 192.168.1.1.
- B. Enable LDP session protection on the link that P1 uses as the next hop to PE2.
- C. Configure PE2 to automatically select its own LDP router ID with 192.168.1.1.
- D. Create a targeted LDP session on PE2 to override the missing routing table entry on PE1.
Answer: A
NEW QUESTION # 14
Refer to the exhibit.
Refer to the exhibit An engineer is troubleshooting a networking issue with several symptoms The shortest path from router R1 to R8 is underused and the longest path is overused Traffic from 10.1.1 1 to 10 8 8 8 is routed on the longest path Traffic between the R1 and the application server is experiencing packet drops and latency problems.
Which action resolves the issue?
- A. Block the advertisement of the application server IP address to router R6.
- B. Increase the RI to R2 link metric to 20.
- C. Configure a Level 2 IS-IS domain on router RI.
- D. Configure route leaking for the IP address Of the application server on router RI.
Answer: C
NEW QUESTION # 15
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13753-25.html
NEW QUESTION # 16
Refer to the exhibit.
There is a connectivity issue between Customer-1 and Customer-2 File servers between the customers cannot send critical data R3 routes are missing from the routing table on the Customer-1 router All interlaces on Customer-1 are up Which configuration must be applied to router R2 to correct the problem?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 17
Refer to the exhibit
Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?
- A. R3
- B. R4
- C. R5
- D. R2
Answer: D
NEW QUESTION # 18
Refer to the exhibit.
A customer reports that Host-1 is failing to receive streaming traffic from the IPTV source. The engineer has confirmed that hosts on router R2 are receiving traffic normally and that Host-1 is correctly sending subscription messages to join the IPTV stream. Which action must the engineer take to correct the problem?
- A. Remove IP PIM SSM from the global configuration on R3 and configure it under the GigabitEthernet 1/0/1 interface
- B. Remove IP PIM SSM and IGMP from interface GigaEthernet 1/0/1 on R3 and configure under global configuration
- C. Configure IGMP version 3 under interface GigabitEthernet 1/(V1 on R3
- D. Configure IP PIM SSM and IGMP version 2 under interface GigatxtEthernet 1/0/1 on R3
Answer: C
NEW QUESTION # 19
Refer to the exhibit.
Refer to the exhibit. An engineer working for a private telecommunication company with an employee id: 4233:46:364 notices that the customer network going through AS30-AS65001-AS65000 is experiencing packet drops when it accesses an application at 172.16.20.1/32 In the DC cloud. The BGP link between AS20 and AS30 is inaccessible because of a fiber cut. Routers RL, RN, and RZ are configured with confederation identifier 10. Which action resolves this Issue?
- A. Option B
- B. Option A
- C. Option D
- D. Option C
Answer: B
NEW QUESTION # 20
Refer to the exhibit.
P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied. The BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open tcp port 179 to each other. Which action fixes the issue?
- A. Configure the send and accept lifetime under key 1
- B. Change HMAC-MD5 to HMAC-SHA1-20
- C. Change HMAC-MD5 to MD5
- D. Change HMAC-MD5 to HMAC-SHA1-12
Answer: A
NEW QUESTION # 21
Refer to the exhibit.
Which statement about this configuration is true?
- A. Router 1 sends and receives multiple best paths from neighbor 192.168.1.1
- B. Router 1 receives only the best path from neighbor 192.168.1.1
- C. Router 1 receives up to two paths from neighbor 192.168.1.1 for all routes in the same AS
- D. Router 1 sends up to two paths to neighbor 192.168.1.1 for all routes
Answer: A
NEW QUESTION # 22
Refer to the exhibit. Why is neighbor 10.1.5.5 stuck in "2WAY" state?
- A. OSPF authentication has failed between R2 and 10.1.5.5
- B. It is an expected behavior when OSPF network type is broadcast
- C. Router ID 10.1.5.5 is not reachable from R2
- D. OSPF parameters (Area ID or hello interval) are mismatched between R2 and 10.1.5.5
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13683-11.html
NEW QUESTION # 23
Refer to the exhibit. A network operator is getting the route for 10.11.11 0/24 from two upstream providers on #XR3.
The network operator must configure #XR3 to force the 10.11.11.0/24 prefix to route via next hop of 10.0.0.9 as primary when available.
Which of these can the operator use the routing policy language for, to enforce this traffic forwarding path?
- A. higher local preference on the prefix coming from 192.168.0.1
- B. lower local preference on the prefix coming from 192.168.0.2
- C. weight of 0 on the prefix coming from 192.168.0.2
- D. weight of 100 on the prefix coming from 192.168.0.1
Answer: A
NEW QUESTION # 24
Refer to the exhibit.
CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core.
What
step can be done to troubleshoot the issue?
- A. Confirm that IS-IS is running with metric-style narrow.
- B. Configure BGP between CE and PE routers.
- C. Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.
- D. Verify the MPLS LSPs.
Answer: A
NEW QUESTION # 25
Refer to the exhibits.
A network operator is troubleshooting packet loss seen from the R1 loopback interface to the R2 loopback interface over the core network. The operator is attempting to identify the next leg in the path from PE1.
Which interface and label path should the operator investigate next?
- A. PE1 - Gi0/0/0/2 - forwarding label 24001
- B. PE1 - Gi0/0/0/2 - forwarding label 24002
- C. PE1 - Gi0/0/0/3 - forwarding label 24001
- D. PE1 - Gi0/0/0/3 - forwarding label 24002
Answer: C
NEW QUESTION # 26
Refer to the exhibit.
Refer to the exhibit. An engineer is troubleshooting an issue with traffic steering using the color-only automated steering mechanism. BGP is failing to automatically steer traffic into an SR policy with the given color of a route, regardless of the next hop. The layer 2 configuration is correct, and the physical connection between the devices is working normally. Whch additional command sequence must the engineer add to correct the issue?
- A. Option A
- B. Option B
- C. Option D
- D. Option C
Answer: C
NEW QUESTION # 27
An engineer applied the summarization configuration on R1 for four networks (192.168.20.0/24 to
192.168.23.0/24) in area 1 and eight networks (192.168.32.0/24 to 192.168.39.0/24) in area 2 to stop the flooding of all the customer routes. While checking the routing table of R2, the engineer noticed that R1 is still sending only specific routes to R2.
Which configuration should the engineer apply on R1 to summarize routes?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION # 28
......
Cisco 300-510 Study Guide Archives : https://braindump2go.examdumpsvce.com/300-510-valid-exam-dumps.html
